XTOOL A80 Full System BT/WIFI Diagnostic Tool

Active Test (Bi-directional Control)

XTOOL A80 is a bi-directional scan tool, is capable of performing Active Tests to access vehicle-specific subsystems and component tests. allows you to receive information to and from the vehicle’s onboard computer and can send commands to the vehicle ECU to perform active tests without using the vehicle's controls, like A/C Clutch on/off, Fuel Injectors, (Cycling) ABS Pump Motor, window, door, sunroof, etc. That’s helpful for DIY mechanics, speeding up the troubleshooting process when it’s time to make repairs.

Note: ECU Coding and Active Test don't support all cars.
Check the supported car list here

BT Connection:
XTOOL A80 comes with wireless VCI provides you with more efficient diagnosis work. You just need to plug the VCI into the OBD2 port, within a working range of 33 feet(10 m), you can use the A80 to communicate with the vehicle through BT connection, providing you with higher mobility.

Remote Diagnosis:
Once any needs or technical support please just contact the support via the “Quick help” engineer can check the problems and provide the professional help ,also can Record problem data if and in the future update here the tablet can works for more car models.

30+ Commonly-used Services & Reset Functions
Oil Reset:
Perform reset the new calculation of Engine Oil Life System for an accurate reading of the next oil change.

EPB Reset:
Allows to reset the calipers, brake discs or pads after the electronic parking brake system is repaired.

BMS Reset:
Reset after replacing the battery to clear the low battery fault information of the original battery and protect the new battery.

DPF Regeneration:
Allows to clear PM from the DPF filter through oxidation or combustion to stabilize the filter performance.

IMMO /Key-Fob-Programming(Top Popular):
Allows to disable a lost vehicle key to protect the vehicle from being stolen and add the new key.

Injector Coding：
Allows to write a new code to the ECU for accurate communication and Injection control. After the ECU or injector is replaced, the cylinder can better identify injectors to accurately control fuel injection.

ABS Bleeding:
When the ABS contains air, perform to bleed the brake system to restore ABS braking sensitivity and obtain a firm brake pedal .

SAS Adjustment:
Allow to clear the fault steering angle sensor memories, perform reset steering angle sensor, and turn off steering wheel warning light.

Throttle Relearn:
Allows to reset the throttle actuators to accurately regulate throttle (or idle engine) operations, helps keep your idling and acceleration smooth.

Also including: TPMS Reset, Air Suspension, Gear Learning, Gearbox Reset, Headlight Adjustment, Airbag Repair, Window Initialization, Seat Configurations, EEPROM Adapter(Package NOT Included), Cylinder, Electronic Pump Activation, Disable Transportation, Tire Refit are all available. Some vehicle menus have hidden functions waiting for you to explore.